Hormart Expeditions - One-stop expedition directory - Recent listing in Range Rover

Range Rover Sport - radiator and AC condenser replacement

Mon, 04 Mar 2024 23:46:00 +0000

Step-by-step Guide to replace AC condenser and radiator in a 2004-2013 Range Rover Sport:

Remove Freon: Use an AC machine to remove the freon from the system. If unavailable, take it to a shop for this step.
Remove Grill: Squeeze the tabs on the top of the grill and pull it back. Then, pull it out from the bottom.
Remove Skid Plates: Take off the lower and rear skid plates, followed by the two side plates or covers.
Drain Coolant: Open the petcock or remove the lower radiator hose to drain the coolant. Disconnect the vent line from the overflow bottle and remove it from the top of the radiator.
Remove Fan Shroud Cover: Pull upwards on the corners to remove the fan shroud cover.
Disconnect Fan: Disconnect the electrical connector to the fan and use a spanner wrench to unbolt the fan clutch. Remove the fan assembly and the upper hose from the radiator.
Remove Lower Fan Shroud: Flare the tab and pull upwards to remove the lower fan shroud.
Disconnect Lines: Disconnect the cooler lines, power steering cooler hoses, and AC condenser lines.
Remove Radiator: Remove screws and mounting pins holding the radiator in place. Carefully remove the radiator and condenser from the vehicle.
Install New Units: Bolt the condenser to the radiator first, then slide them in as an assembly.
Reconnect Components: Reconnect all hoses, lines, and bottles. Secure the mounting pins and bolts.
Refill Coolant: Fill the vehicle with coolant and bleed the air out of the system.
Charge Freon: Charge the freon to the proper level.

Follow these steps carefully for a successful replacement of the AC condenser and radiator in your Range Rover Sport.

Video

https://www.youtube.com/watch?v=flxxxsp5h38

Range Rover Sport or LR3 - alternator replacement

Mon, 04 Mar 2024 23:31:49 +0000

How to Change Alternator on your Range Rover Sport 2005-2013 L320, it also applies to Land Rover LR3/ Discovery 3.

Identify Symptoms: Look for various dash lights, a burning smell, and the vehicle dying shortly after jumping it, indicating a failing alternator.
Disconnect Battery: Before replacing the alternator, disconnect the negative terminal of the battery to prevent electrical shocks.
Locate Alternator: The alternator is located underneath the vehicle. Remove the oil skid plate and a cover on the passenger side to access it.
Remove Bolts: The alternator is held in place by three bolts. Remove these bolts carefully.
Loosen Tensioner Pulley: To remove the alternator belt, loosen the tensioner pulley. Then, remove the red positive cable and the electrical wire from the back of the alternator.
Install New Alternator: Install the new alternator by reversing the removal process. Ensure everything is securely fastened.
Reconnect Battery: Reconnect the negative terminal of the battery.
Jumpstart Vehicle: Jumpstart the vehicle once to recharge the battery.
Test Run: Let the vehicle run for about 20 minutes to ensure the alternator is functioning properly.

Video

https://www.youtube.com/watch?v=UWzdxM9t1vE

Range Rover L322 - Starter motor replacement

Tue, 09 Jan 2024 03:29:05 +0000

Replaced the starter motor on a 2006 Range Rover L322, addressing the clicking noise issue. The fix demonstrated by Fix It Angel, is applicable to Range Rovers from 2002 to 2012, providing a comprehensive solution for owners facing similar challenges.

https://www.youtube.com/watch?v=Q2JfFvonNUw

Range Rover Classic - rescued from the scrapyard

Mon, 13 Nov 2023 03:22:49 +0000

A comprehensive series spanning three years, showcasing a home-built, hands-on DIY car restoration experience captured through stop-motion. The series encapsulates the journey of purchasing a beater, hands-on work, and the acquisition of new skills, all condensed into a single film.

https://www.youtube.com/watch?v=bRs-4AXb9_U